PRODUCT CATEGORIES > AUDIO > MICROPHONE PRODUCTS >

EZ-MPA2 Dual Microphone Preamplifier - Stereo Output with Compressors

Model numbers:
EZ-MPA2 includes power supply with North American plug
EZ-MPA2X includes worldwide power supply (specify plug)

Features:

Left and Right Balanced XLR Microphone Inputs
Switch-Selectable Phantom on Rear Panel
Unbalanced Output on MINI or RCA Jacks
Input and Output Connections on Rear Panel
Front-Panel Compressor Enable/Disable Switch
Audio Compressors Control Overloads
Front-Panel LEVEL Control for Each Channel
Dual-LED VU Meter for Each Channel

Advantages:

Optimized for Dynamic or Condenser Mics
Headroom Accomodates High Input Levels
Headroom Increases with Lower Gain Settings
Compressor Limits Clipping Over Wide Dynamic Range

Click here for larger image of the EZ-MPA2 Application Drawing

Click here for information on how to buy this product

The EZ-MPA2 is a stereo microphone preamplifier with front-panel volume controls and audio level metering. A front-panel switch engages audio compressors to control overloads and clipping during high level audio bursts or peaks from the microphones. Dynamic or condenser microphones are both supported with rear-panel switchable phantom voltage. The line output is available on RCA or MINI jacks. Left and right channel LED VU metering facilitates easy level adjustment. The EZ-MPA2 is ideal to add microphone inputs to mixers and amplifiers with line inputs. It is used in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms, studios and commercial sound systems.

Typical Performance:

Inputs (2):

1.2 kΩ balanced on XLR jack, mic-level, -11 dBu max.

Level controls (2):

Off to 50 dB gain for each input

Outputs (2):

-10 dBV nominal on RCA jacks or Mini jack, +16 dBV max. without compression, -4 dBV max. with 20 dB compression

Frequency Response:

80 Hz to 40 kHz (±1 dB, mic input, -6 dB at 20 Hz with integral high-pass filter)

THD+N:

< 0.1% (35 Hz to 20 kHz, -50 dBu input)

Compression: