PRODUCT CATEGORIES > AUDIO > POWER AMPLIFIERS >

EZ-MXA20 20 W Stereo Audio Mixer-Amplifier with EQ - 8 Ω, with Power Supply

Model numbers:
EZ-MXA20 includes power supply with North American plug
EZ-MXA20X includes worldwide power supply (specify plug)

Features:

Audio Amplifier with Mic and Line Input Mixer
10 Watts RMS Per Channel into 8 Ω
8 Watts RMS Per Channel into 4 Ω
Switch-Selectable Load Impedance on Rear Panel
Balanced Microphone Input on XLR
Unbalanced Line Inputs on RCA Jacks
Switch-Selectable Phantom on Mic Input
Bass and Treble Tone Control Equalization
Integral Overload Limiter with LED Indicator
Limiter Controls Overloads from Clipping

Advantages:

Limiter Produces Output Level Comparable to Higher Power Amp

Click here for larger image of the EZ-MXA20 Application Drawing

Click here for information on how to buy this product

The EZ-MXA20 is a stereo mixer amplifier with one mic input and two line inputs. Bass and treble tone controls are included. An integral compressor/limiter allows a higher sound output level without clipping than is possible using a standard amplifier. The output drives 4 or 8 ohm speakers. The EZ-MXA20 is used in houses of worship, restaurants, clubs, meeting rooms and commercial sound systems.

Typical Performance:

Inputs (3):

1.2 kΩ balanced on XLR jack, mic-level, -55 dBu Min. (for 10 W out), -11 dBu max.(1) > 10 kΩ, -10 dBV nominal on RCA jacks, -13 dBV Min. (for 10 W out), +22 dBV max. (2)

Gain:

Off to 74 dB (mic), Off to 32 dB (line)

Outputs (2):

Left and Right, 10 Watts RMS into 8 Ω per channel or 8 Watts RMS into 4 Ω per channel, switch-selectable output impedance

Equalization:

±10 dB @ 10 kHz, ±9 dB @ 80 Hz

Frequency Response:

50 Hz to 20 kHz (±1.5 dB, mic input, 10 Watts), 35 Hz to 20 kHz (±1.5 dB, line input, 10 Watts)

THD+N:

< 0.25%

CMRR:

> -55 dB (mic)